ArcelorMittal CLN Distribuzione Italia and Nuova Eletrofer team up to give life to a new initiative: Electrical Steel Service Solution.
eSSS will accompany the development of the electric steel market for Industry and E-Mobility, thanks to the know-how of the two founding partners.
eSSS provides a complete range of technical and industrial services, offering support to customers' decarbonisation and Sustainability projects.
ArcelorMittal CLN Distribuzione Italia
ArcelorMittal CLN contributed to the birth of the IEO Proton Center, a new center for the proton therapy that represents the most technologically advanced form of high precision radiotherapy.
An important and innovative project of the IEO CCM Fundation (www.fondazioneieoccm.it).
ArcelorMittal CLN has recently completely sold the stock of stainless steel flat products, located at Monza plant, to the company Metalluminia Srl and has therefore ceased its activity in this specific sector.
This operation is part of the strategy of focusing on the core business of the service centres dedicated to the flat products in low carbon steel.
On April 22 we celebrate the EARTH DAY 2021.
This anniversary is more and more important: the health of our planet is increasingly compromised and the climate crisis is increasingly serious.
This year's theme is "Restore our Planet" because while it is important to reduce the environmental impact, on the other we must also try to remedy the damage caused to the Earth up to now.
Due Iveco Strails NP – Natural Power - were purchased by Tamagnone s.r.l., a logistic services company controlled by AMCLN.
These are two Stralis AT 440 S 33 TP CNG (compressed natural gas) EURO 6 thanks to which fuel consumption, noise, emissions and CO2 level will be reduced.
Efficient and eco-friendly solutions are and will always be among our priorities.
Aiming at the expansion of our product range, at the increase of our production capacity and at the continuous improvement of efficiency, in 2020, despite the particular negative situation due to Covid-19, it was decided to invest in the new SL1650 slitter, a confirmed investment, which will be operative, at our Monza plant, starting from May 2021.
The main characteristics of the new system are:
Among the various investments planned by us for 2020 there is the one of the expansion of the coils storage warehouse and for the increase of the storage space for cut to length sheet material in commercial thicknesses and formats at our plant of Fontanellato (PR).
The purpose of this investment, now fully operating, was to respond to the market increasingly widespread need for JIT delivery of the most popular products.
September 7, 2020, is the world first International Day of Clean Air for blue skies — calling for global action to combat air pollution, one of the greatest health and environmental challenges of our time.
The International Day of Clean Air for blue skies is a day dedicated for us all to consider action to promote clean air initiatives and make changes in our daily lives to reduce air pollution. These actions, in turn, benefit people’s health and reduce climate warming air pollutants and greenhouse gases.
The surveillance inspection visit for maintaining the UNI EN ISO 9001: 2015 certification had a positive result.
We received a few constructive observations that offer us a further opportunity for improvement ... which is always continuous ...
This year, the stringent rules of social distancing caused by the fight against Covid 19 have forced remote audits, made possible by VPN and Team Chat Apps.
New communication methods and tools, the same rigour in verifying compliance with the standard requirements to protect the service for our customers ...
The continuous improvement of production processes is a must.
The continuous evolution of market needs in terms of service, generated by various factors including Industry 4.0 and the vital general production efficiency, must be constantly followed, even better if anticipated.
For this reason, the various investments planned by AMCLN have been confirmed, despite the critical phase due to Covid.
The first two 2020 interventions have already been completed ...
On April 30th the CISP General Assembly was held online and the new Board was elected.
Ivan Camorani, of Vetriceramici Ferro, was reconfirmed as President of the Association and our Dino Bellotto, bug expert also enameling steel, was appointed as Council Member.
More information about the new CISP Board are available at the link New CISP Board.
The Board of Directors of ArcelorMittal CLN Distribuzione Italia Srl approved on 17th December 2019 the sale of the whole stake of San Polo Lamiere S.p.A.
The agreement was reached with Mr. Attilio Monici, the company's largest shareholder, and was finalized on 28th February 2020.
The sale of San Polo Lamiere shareholding is consistent with the business plan of the ArcelorMittal CLN Group, focusing the financial resources to "core" activities of strategic interest for the Group.
Dear Customers,
considering the recent episodes of Coronavirus faced in our country, with this note we would like to reassure you that we are taking all precautionary measures in contiguity with the Ordinance of the Ministry of Health of 21.2.2020, in accordance with the information received from the Public Health Authorities and in coordination with our own competent doctor.
Specifically, the company has disclosed to all its staff a press release containing provisions:
For the progressive reduction of the weight of the vehicles, the most performing solution is the use of the latest generation of high-strength steels (AHSS / UHSS / PHS).
Another current solution, sometimes combined with steel, is the use of aluminum alloys which, thanks to the low density, allow to further reduce the mass of some components.
ArcelorMittal CLN also follows the development of these products and is technically capable of cut to length and slit aluminum alloys, with a focus on 5000 and 6000 alloys, from th. 0.5mm to th. 3mm.
Tamagnone s.r.l., a logistic service company controlled by AMCLN, has been using an Iveco Strails NP - Natural Power for months to transport our products.
This gas-powered vehicle reduces fuel consumption, noise, emissions and CO2 level by up to 95% with compressed or liquefied biomethane.
It is essential to use an efficient and eco-friendly solution.
ArcelorMittal CLN will present for the fourth consecutive time its range of Electrical Steels at the forthcoming edition of Coiltech 2019.
Coiltech is the most qualified meeting point in the electromechanical field. The product range offered by the Coiltech exhibitors covers all stages of production of electric motors, transformers, generators and electric pumps.
Coiltech 2019 will take place in Pordenone from 25 to 26 September.
Further to the closing of the deal, which took place on June 28th 2019, between ArcelorMittal and Liberty Steel, ArcelorMittal CLN Distribuzione Italia srl has completed the sale of its own remedies that were part of the original agreement between ArcelorMittal and Liberty.
The 2019 edition of the Health and Safety Day organized by the Osimo and Cassino plants was hosted by the Lega del filo d'oro association.
Steel human was the concept of the 2019 edition of Made in Steel: the Milan three-day event that every two years focuses on the steel market and tries to envisage future trends and develpments through a programme of conferences and debates.
